EWS2 EWS3.2 Emulator E34 E36 E38 E39 E46

EWS2 EWS3.2 Emulator E34 E36 E38 E39 E46

Installation:
1. Remove original EWS2 control unit, find +12v ACC, GND, K-line wires, attach emulator. Emulator must be in service mode: JUMPER 1 shorted.
2. Connect ANY K-line diagnostic adapter to vehicle diagnostic connector and launch EMULATOR
CONFIGURATION UTILITY:

3. Choose COM port, write in desired ISN number, press button Store. Or -
4. For some ECU s it is possible to read ISN number directly from engine control unit. In this case
select option ECU xxxxx , press Read. Software will try to read ISN. If successful, choose option
EWS emulator and press button Store to save ISN number into emulator.
5. Disconnect emulator from K-line, remove JUMPER 1 and connect K output from emulator to
DME(DDE) <-> EWS line.
6. Don t forget to short two starter relay wires (EWS connector)!
7. Car is ready to start.

In case of EWS3.2 similar procedure is used, only difference is that that it is NOT connected directly to
diagnostic K-line.
There are NO any counters or car starts limited. You can change and store new ISN without any limitations.
Emulator is shipped with JUMPER 1 shorted. For testing purposes ISN 0579 is stored by default.

Package including:
1pc x EWS2 EWS3.2 Emulator E34 E36 E38 E39 E46

JIU TECH Enterprise Co., Ltd specializes in development and production of auto diagnostic scanners and auto maintenance tools for years. We provide better quality products and service for our clients. OEM, ODM manufacturing service for business all over the world is appreciated. Our products have been delivered to Europe, America, Africa and Oceania, all over the world, bringing us annual export sales of $2 million last year.

 Emphasis on product quality

We develop and manufacture auto diagnostic tools, car keyless remote controller, car key shell, transponder key, remote key, remote control duplicator and other auto maintenance tools etc. To ensure the consistency of our product quality, Our QC members with five years' experience on average monitor the entire production process.

We also offer a one year warranty.

Emphasis on Management
We insist on high standard, scientific development thoughts, devoted to pursuing continuous creativity of technology and management. Relying on the advanced equipments and high & stable quality, We have been approved by ISO9001:2000, FCC, CE. We benefit all our customers without any trouble of product quality.

We possess an 800-square-meter factory equipped with five production lines. Our advanced equipment includes automatic chip SMT lines, dust-free vacuum refilling machines and dust-free vacuum packaging machines. We produce 1, 000 units every month. Our delivery lead time is just one or three working days for our standard products. OEM products lead time is only within 2 weeks..

Providing best products and best service is our company target. Contact us today by email or phone and start with a small order, you will find we are your most valuable cooperator.