
Automotive ECU Programmer NitroData Chip Tuning Box for Motorbikers M11 / Buell S1
NitroData Chip Tuning Box for Motorbikers M11
Why we need to use Nitrodata chip tuning box?
As some motorcycles run richer and others are leaner, we suggest
that you start by using the NitroData with the dial set to minimum
and gradually increase the dial to a higher until you find the
setting which is best for your bike. A slightly modified engine
(sport exhaust, air filter etc.) will generally a better
performance with the dial set around midle if the bike has an
aftermarket exhaust system fitted. A setting between midle and
midle more can be used
When the catalytic converter has been removed. The original
standard performance is to be found at minimum setting on control
unit.
If the bike running richer then the setting will probably need to be set between litle then minimum. You will feel from the performance of the motorcycle when the engine is running smoothly and it is not necessary to run a Dyno test. Please avoid falling into the trap of thinking the higher the maximum the better the performance as it will vary depending on the bike. If it appears that you are losing the torque when you hit high speeds this most probably means that you have set the NitroData number too high and need to try a lower setting.
What you need to do to use Nitrodata chip tuning box?
To fit the NitroData you will need to locate the air temperature sensor (IAT) which is located near the air box on most bikes.Disconnect the plug connectors which are already attached to the IAT and attach the plug connectors of the NitroData module to the relevant connector of the IAT. The NitroData is now ready to use.
What motobike brand it can do?Does it has user manual?
Please check the technical service which next to the description.
NitroData Chip Tuning Box for Motorbikers M11 vehicle list:
Aprilia Falco 00-10
Aprilia RSV 1000 98-03
Aprilia RSV 1000 SP / Tuono 99-00
Aprilia RSV 1000R / Tuono 05-
Aprilia RSV R 05-
Aprilia Tuono / Tuono 02-05
Buell 1125 R / CR
Buell S1
Buell S2
Buell S3
Buell X1
Buell XB1
Buell XB12 S / SS / CG
Buell XB12 X / XT
Buell XB9 S
Cabiva Navigator
Cabiva Navigator 1000
Cabiva Raptor 1000
Cabiva Raptor 1000 - X3
Cabiva Raptor 650 IE
Suzuki Burgman 650 03-10
Suzuki GSR 600 06-09
Suzuki GSX R 600 01-05
Suzuki GSX 1400 07-
Suzuki GSX R 1000 01-06
Suzuki GSX R 750 96-05
Suzuki Mayabusa 1300 00-07
Suzuki Intruder 1500 05-08
Suzuki SV 1000 03-07
Suzuki SV 1000 N
Suzuki SV 1000 S
Suzuki SV 650 S / N 03-06
Suzuki TL 1000 97-01
Suzuki TL 1000 R
Suzuki TL 1000 S
Suzuki V Strom 1000 02-09
Suzuki V Strom 650 04-06
Suzuki VZ R/N 1800 06-09
Yamaha TDM 900
Package including:
1pc x NitroData Chip Tuning Box M11
JIU TECH Enterprise Co., Ltd
JIU TECH Enterprise Co., Ltd specializes in development and production of auto diagnostic scanners and auto maintenance tools for years. We provide better quality products and service for our clients. OEM, ODM manufacturing service for business all over the world is appreciated. Our products have been delivered to Europe, America, Africa and Oceania, all over the world, bringing us annual export sales of $2 million last year.
Emphasis on product quality
We develop and manufacture auto diagnostic tools, car keyless remote controller, car key shell, transponder key, remote key, remote control duplicator and other auto maintenance tools etc. To ensure the consistency of our product quality, Our QC members with five years' experience on average monitor the entire production process.
We also offer a one year warranty.
Emphasis on Management
We insist on high standard, scientific development thoughts,
devoted to pursuing continuous creativity of technology and
management. Relying on the advanced equipments and high &
stable quality, We have been approved by ISO9001:2000, FCC, CE. We
benefit all our customers without any trouble of product quality.
We possess an 800-square-meter factory equipped with five production lines. Our advanced equipment includes automatic chip SMT lines, dust-free vacuum refilling machines and dust-free vacuum packaging machines. We produce 1, 000 units every month. Our delivery lead time is just one or three working days for our standard products. OEM products lead time is only within 2 weeks..
Providing best products and best service is our company target. Contact us today by email or phone and start with a small order, you will find we are your most valuable cooperator.