
250W 7 Channels Mobile Phone High Power Signal Jammer 150m
Shielding Area
Phone Signal Jammer Introduction:
Jammer GW-VIP-JAM7 is designed as a luggage case for easy carrying everywherer. This
Portable Jammer Carry Case is durable enough for protecting your
signal jammer products. Easy to operate and convenient to be
carried with you anywhere. With this one beside your side, you
don't need to worry about the hot situation after long time working
with your jammer kit.
No cares about the falling down broken with your funny device, also
can avoid the sudden watering into the jammer device. Handsome
design and high quality materials will allow you to enjoy the
little case surprise to the largest extent.
Phone Signal Jammer Technique characteristics
1. Taking use of super-high frequency with high effective power.
2. Effective output power (channel power) and bigger interfere
radius.
3. Only interfere downlink frequency of mobile system, without
disturb normally working of Base Stations.
4. Imported elements: Slow start up design of circuit. These
elements can maintain the stable operation condition with high
integration.
Phone Signal Jammer Interface
1. Seven N interfaces, Which are using to connect antennas
2. Two power supply interfaces (AC220V IN/ DC24V)
System fittings
System fittings consist of block package, Omni antenna, etc.
7 modules have single switch, The next step will provide the
function of each fitting in brief.
Antenna
1. Omni Directional Antennas
Gain: 5dBi
Interface: N male
2. Vertical Ichnography
Frequency Range | CH1 450-470MHz; CH2 400-470MHz CH3 135-174MHz; CH4 851-894MHz CH5 925-960MHz; CH6 2110-2170MHz CH7 1805-1990MHz |
Length | 80cm , CH3 is 113cm. |
Model | GW-VIP-JAM7 |
Input Impedance | 50Ω |
VSWR | ≤1.5 |
Gain | 5dBi |
Maximum Power | 50W |
Polarization | Vertical Polarization |
PIM | <-107dBm |
Connector Type | 7/16 or N-K |
Lighting Protection | Direct Ground |
Wind Velocity | 60(m/s) |
Hold Pole Diameter | φ40(mm) |
Notices
1. Be sure to connect all the antenna before the power supply is
switch on. Please do not take off antenna when the machine is
working.
2. Antenna shall be used vertical to the ground, working more
efficiently.
3. Please don’t put the jammer in the water and fire to avoid using
in the bad
condition of over-wet, over-hot, high voltage and high magnetism.
4. If the jammer can not be charged or other unconventionality( the
indicator light doesn’t light up), please contact with the
distributor in local place. Any refit and incorrect repair is not
allowed.
5. Any ruin and disrepair caused by incorrect operation and
disassembly will be excluded from the repair with free of charge.
Phone Signal Jammer Technique specifications
Output interface | Shield band of frequency | RF output power (±1dBm) |
CH1 | 450-470 MHz | 47 dBm |
CH2 | 400-470 MHz | 47 dBm |
CH3 | 135-174 MHz | 43 dBm |
CH4 | 851-894 MHz | 46.5dBm |
CH5 | 925-960 MHZ | 46.5 dBm |
CH6 | 2110-2170 MHZ | 45.5dBm |
CH7 | 1805-1990 MHZ | 44.5 dBm |
Output Power: 250W | ||
Power consumption: 500W | ||
Power supply: AC110V / DC24V 40Ah Battery. | ||
Shielding area: 50-150m @ according to signal density of mobile network | ||
Antenna Weight: 3Kg | ||
Antenna with Packing: 11.2KG | ||
Packing Size(length × wind × high):117×28×13.5cm | ||
Jammer Weight: 31.2Kg | ||
Jammer with Packing: 41.4KG | ||
Packing Size(length × wind × high):64×53×34.5cm | ||
Humidity: 30%-95% Running Temperature: -20 to +55 Celsius Degree |
Main view
Top view(Output board)
Shenzhen Greetwin Technology Co.,Limited
Shenzhen Greetwin Technology Co., Limited is one of the leading suppliers which specializes in designing and
manufacturing RF Jamming Equipment and Wireless Coverage Products.
Wireless Coverage Products include 2G 3G 4G LTE 5G RF
Repeater.
The RF Repeater solutions will bring smooth and clear
calls, support all bandwidths and mobile standards including TETRA,
iDEN, LTE700, GSM850, EGSM, GSM900, DCS1800, PCS1900, CDMA800,
CDMA450, LTE 4G, CDMA2000, 3G(WCDMA), LTE2600 and TDD-LTE series.
Such as, Wide band Repeater, Band selective Repeater, Digital Repeater, High Power Outdoor Repeater, Fiber Optic Repeater, ICS Repeater, Consumer Signal Booster, Power Amplifier.
We are committed to providing the best solutions for mobile operators, offering OEM and ODM service. Products can be customized according to different operators in the world and the output power are available from 0.01W to 20W.
RF Jamming Equipment include Cell Phone Signal Jammer,
RF Communication Jammer(20-6000MHz) and 20-200W Power amplifier.
GREETWIN is the foremost innovator in the field of RF
jamming, offering a comprehensive range of jamming equipment and
systems which have a proven record of reliability and performance
in all types of applications and environmental conditions.
In countering the ever-growing threat of remotely
controlled improvised explosive devices (RCIEDs), we has invested
heavily in the development of a range of multi-band,
very-high-power jamming systems for the protection of troop
transportation, military and police checkpoints, large governmental
establishments, bomb disposal squads and VIP convoys.
Such as, 5KM Drone jammer, UAV jammer, High power bomb
jamming devices, Military IED jammers, Digital programable jammer,
VIP Convoy Bomb Jammers (RCIED Jammers), Mobile Phone Signal
Jammers, Prison Jammers, Portable Jammers, Handheld Jammers, to
suit all types counter terrorism activities.
Our clients are government agencies, military, SWAT
team, prison, school, bank, law enforcement and VVIPs. We also
serve corporations and private individuals who must take
responsibility for protecting assets, proprietary information,
executives and family members.
GREETWIN products have been exported to more than 60
countries and regions around the world. Such as Southeast Asia,
Africa, Europe, South America and the Middle East.
Let us hand in hand and create a glorious cause!