
Electric smart power tail gate is the electric device usually loaded on the basis of the traditional trunk,control the opening of the trunk by a button or a remote control in the car. |
The function of automobile electric tail door has been replaced by years of technology, and has many different types of customers need came out, at present it has two types of electric power tail gate lifter, |
One is Single pole, another one is Double Pole, there are also has two kinds of extension functions, one foot kick and an electric lock. |
The single pole is the first generation of electric tails,The
opening of the door is controlled by an electrical signal
instruction issued by a vehicle button.
Advantage:It takes only one bar and a simple signal receiver,its
operating cost is very low,It can be installed at a very low price
Disadvantage:Because it is a single rod support,The tail gate only
receives electricity from an electric rod.Lead to an overall
imbalance of force,No matter what good material is used for the
tail gate,
To varying degrees of deformation in long term use,Influence the
beauty of vehicles ,Such as deformation, hinges failure, etc
The double rod is based on the optimization of the single rod
device,Compared with single pole,The hidden danger of the force
balance of the tail gate will not exist,because it's a bar,The
synchronization rate for two poles is also required,So the price is
much higher than the single pole,The single rod is very applicable
to the lighter type of the tail door.The heavy tails of the SUV,
such as the car, need to apply the double lever to get the best
products experience!
The one foot kick is the inductive opening and closing function of
the tail door,First, the vehicle needs to have a keyless entry into
the system,When the key appears in the keyless induction range,That
is, the owner of the key is close to the car.The tail gate
induction area will begin to work,When the foot appears in the
induction area, the trigger is triggered, when the Tail door
opening,Save the steps of the hand on the remote control,In the
absence of hands,And it looks very fashion.
The traditional electric tail door is very noise when it
closes,Many car owners are very distressed ,For fear of the car
smashed ,To solve this problem ,The electric lock was invented,Its
role is to start at the end of the door,Slow and steady to shut the
door.The realization of silence and opening and closing
The convenience of the electric tail door is unquestionable,When
the owner is not tall enough,The hand can't reach the SUV's tail,Or
the tail is too heavy ,It's hard to push out, Only lightly press
the button ,The trunk can be opened easily,Electric tail gate has
intelligent anti clamp,High memory and other functions, A
combination of the above advantages,This is really a very useful
device.
The mechanical strength has passed the national compulsory 3C
certification, and the reliability is guaranteed. The main
components are purchased from the OEM supply chain, which is more
stable. The service life has been actually tested by many customers
to meet the requirements of the car factory. If the electric
suction function is not normal, the tailgate can also be unlocked
manually.
When the tailgate is about to close, the strut can rely on the
electric suction function to achieve the closing action without
accelerating and afterburning, and the effect is very good.
There are several ways to open an electric tailgate, depending on
the specific vehicle and its features. Here are some common
methods:
Key Fob: Many vehicles with electric tailgates include a dedicated
button on the key fob. Pressing the corresponding button on the key
fob will activate the tailgate, causing it to open or close
automatically.
Front Button: Inside the vehicle, there is typically an interior
control panel, often located on the driver's side door or center
console. This panel will have a dedicated button or switch
specifically for opening and closing the tailgate. Pressing the
button or activating the switch will trigger the automatic
operation of the tailgate.
Rear Button: Some vehicles have an exterior button or touchpad
located near the tailgate itself. Pressing this button will
initiate the opening or closing of the tailgate. This is useful
when approaching the vehicle from the rear and you want to open the
tailgate without entering the vehicle.
Foot Gesture/Sensor: Certain electric tailgates offer hands-free
operation using sensor-based systems. These systems detect foot
gestures or movements under the rear bumper or designated area. By
waving your foot or performing a specific motion, you can trigger
the tailgate to open or close without physically touching anything.
Q1. What are your terms of packing?
A: Generally, we pack our goods in carton box, suitable for
shipping container.
Q2. What is your terms of payment? A: T/T 30% as deposit, and 70% before delivery. We'll show you the
photos of the products and packages before you pay the balance.
Q3. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving your
advance payment. The specific delivery time depends on the items
and the quantity of your order.
Q4. Can you produce according to the samples?
A: Yes, we can produce by your parameters.
Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but
the sample fee is required.
Dongguan Kaimiao Electronic Technology Co., Ltd
Company Profile
Founded in 2009, the company is committed to the development and production of intelligent in-vehicle infotainment systems. With the “automobile intelligent system” as its core product, it provides intelligent vehicle solutions for OEM customers. Our company has independent software and hardware R&D teams, all the core technology is all self-control, and has independent production capacity, but also has a very perfect after-sales service team. Providing excellenct products and comprehensive service for car factory.
The headquarters of the company is located in Zhonghaixin Science and Technology Park, Longgang District, Shenzhen. The new manufacturing base in Fenggang Town, Dongguan City is more than 50000 square meters. It was officially used on September 1, 2017. It has the most advanced production line in the industry and the annual production capacity is expanded to 2 million units.
The company’s product sales and service network covers 35 provinces and cities across the country. The company is firmly committed to scientific and technological innovation, concentrating on product technology research and development, focusing on product quality and integrity services. We have a large number of outstanding talents in the field of professional technology. R&D personnel have a wealth of theoretical knowledge and research and development experience, making a breakthrough in research and development.